Self-adhesive replacement foam protector for K9 filter holder. Contains: 1 pair.

The labels from this labeling sheet can be used to label the slots in the filter pocket to match the filters used. Scope of delivery: 1x label sheet, colored

Precision engineering screwdriver with practical holding function and roll protection Quick tightening or loosening is possible by supporting your hand on the rotating cap and using the quick-turning zone below the rotating cap. There is no need for time-consuming changes. The KS Tools Torx screwdriver offers a precise fit and optimized corrosion protection. Features:safe against electrostatics with quick-turn end cap   Scope of delivery: 1x screwdriver

These spacers are used to mount rectangular filters with dimensions smaller than 100x150mm or 100x100mm in the ARMOR frame.Filters from 2mm to 1.1mm glass thickness can be used with this. Scope of delivery: 4x spacers for the magnetic ARMOR frames

This smartphone tripod holder with Magsafe is ideal for mounting an iPhone with Magsafe. Ideal for vlogging, for example. Features: Mounting on the hot shoe possible Quick release with swivel fastening Magsafe holder Scope of delivery: 1x smartphone tripod holder WITHOUT tripod

Experience the freedom of dust-free sensors with the Nitecore sensor cleaning swabs. These specially developed cleaning sticks offer an effective and gentle way to remove dust, dirt and other contaminants from your camera's sensor. In addition, we recommend using the Nitecore Sensor Cleaning Fluid Pro (20ml) to achieve optimal cleaning results achieve.Key features:Precise cleaning: The sensor cleaning sticks are in different sizes available to the to accommodate different sensor sizes. Choose the appropriate size according to your camera's sensor for precise and effective cleaning.High-quality materials: Made of high-quality materials, the cleaning sticks offer gentle cleaning without damaging the sensor. The soft and lint-free sticks effectively remove dust, dirt and fingerprints for crystal-clear images.Easy to use: The cleaning sticks are easy to use and allow for a quick and easy cleaning of the sensor. Gently insert the swab into the camera sensor and remove dirt with gentle movements.Hygienic packaging: Each set of cleaning swabs comes in a hygienic Packaging supplied to ensure the cleanliness and effectiveness of the sticks. Each pack contains 10 sticks to give you enough for multiple cleaning cycles.Versatile use: The Nitecore Sensor cleaning sticks are not only suitable for camera sensors, but can also be used for cleaning other sensitive surfaces such as objective lenses or displays.For thorough and effective cleaning, we recommend combining the Nitecore sensor cleaning sticks with the Nitecore Sensor Cleaning Fluid Pro (20ml). Together they provide the perfect solution to keep your camera sensor spotlessly clean and maximize the quality of your recordings.Choose the appropriate size of cleaning swabs according to the sensor size Your camera:Size: Micro 4/3 12mmTongue width: 12mmLength: 75mm Packaging: 10 pieces / BoxSize: APS-C 16mmTongue width: 16mmLength: 120mmPackaging: 10 pieces / boxSize: Full format 24mmTongue width: 24mmLength: 75mmPackaging: 10 pieces / boxSize: Medium format 34mmTongue width: 34mmLength: 75mmPackaging: 10 pieces / boxKeep your camera sensor in top condition with the Nitecore sensor cleaning sticks and enjoy clear and sharp recordings at all times.

This accessory set was specially developed for the Nitecore BB2 Air Blower.It can be easily attached to the end of the BB2 for thorough and easy cleaning.Features:The set contains three nozzles.Extended Dust Brush : A longer brush than the standard BB2 brush for extra reach.Extended brush nozzle: A long, narrow extension with a round brush head for precise cleaning.Crevice nozzle: A long, narrow extension nozzle without a brush, perfect for tight spots.Scope of delivery:1x set of three nozzles for the Nitecore BB2

Self-adhesive replacement foam protector for ARMOR filter holder. Scope of delivery: 1 pair of self-adhesive replacement foam protectors

Scope of delivery: 1x screw-in aid for inlaid ring

The magnetic brush is for the electric Air Blower BB2.Features:Tool-free assemblyEasy to clean (under lukewarm running water)Scope of delivery:1x brush for BB2 air blower

Replacement rails for the K9 filter holder from our 100mm filter series These rails are mounted on the front left and right of the holder. They are used to insert the filters and hold the filter lenses in place. Scope of delivery: 1x 2 filter rails for 1.1mm and 2.0mm filters 1x 3 filter rails for 1.1mm and 2.0mm filters

This mounting aid is suitable for mounting the KW Revolution Inlaid adapter ring in the lens thread.The mounting tool makes it very easy to mount the adapter ring.Scope of delivery:1x screw-in aid for Inlaid ringNote: Please only tighten the Inlaid adapter ring hand-tight!